Industrial Safety Equipment ,LLC Fixed Gas Detection Stand Alone Systems

OTIS Instruments Permian II Series Complete Systems

Permian II

Two Channel Controller

OI-645

Hydrogen Sulfide

Sensor Assembly

Otis Instruments Permian II System is a DC powered dual channel Hydrogen Sulfide or Combustible Gas Monitoring system. The Permian II controller is equipped with a digital display, dual alarm levels for Low and High alarms, and a fault indicator. Each alarm level uses 10 Amp relays, and has a visual LED indicator on the front panel. Both the Low and High alarms are adjustable full scale, and the High alarm is equipped with a High alarm disable switch. The systems also includes hydrogen sulfide OR combustible gas (LEL) sensor(s), a strobe light alarm, an audio alarm, 25 feet of sensor cable and 50 feet of power cable with battery clips.

Ordering Information
Part Number	Description	List Price (U.S. $)
OI-792-1-H2S	OTIS Permian II with One Hydrogen Sulfide Sensor.
OI-792-1-LEL	OTIS Permian II with One Combustible Gas (LEL) Sensor.
OI-792-2-H2S	OTIS Permian II with Two Hydrogen Sulfide Sensors.
OI-792-2-LEL	OTIS Permian II with Two Combustible Gas (LEL) Sensors.

GFG Instrumentation Dynagard AutoCal Series

GFG

Instrumentation

Dynagard

for Oxygen

GFG

Instrumentation

Dynagard

for

Toxic Gases

The Dynagard AutoCal Series single point detection systems accurately measure toxic gas and oxygen levels. Dynagard offers a large back lit LED display, an internal horn, linear 4 to 20 mA output, Auto Cal calibration, and smart sensor technology, on-board relays, and 110 VAC or 24 VDC power supply.

Ordering Information
Part Number	Description	List Price (U.S. $)
3711-200	GFG Dynagard for Ammonia 0 - 200 ppm, (-40^oF to +105 ^oF).
3711-500	GFG Dynagard for Ammonia 0 - 500 ppm, (-40^oF to +105 ^oF).
3711-200SE	GFG Dynagard for Ammonia 0 - 200 ppm, (-4^oF to +105 ^oF).
3711-500SE	GFG Dynagard for Ammonia 0 - 1500 ppm, (-4^oF to +105 ^oF).
3704-500	GFG Dynagard for Carbon Monoxide 0 - 500 ppm
3708-050	GFG Dynagard for Chlorine 0 - 50 ppm
3781-001	GFG Dynagard for Chlorine Dioxide 0 - 1 ppm
3792-020	GFG Dynagard for Ethylene Oxide 0 - 20 ppm
3742-200	GFG Dynagard for Hydrogen Chloride 0 - 200 ppm
3743-200	GFG Dynagard for Hydrogen Cyanide 0 - 200 ppm
3703-200	GFG Dynagard for Hydrogen Sulfide 0 - 200 ppm
3706-050	GFG Dynagard for Nitrogen Dioxide 0 - 50 ppm
3761-300	GFG Dynagard for Nitric Oxide 0 - 50 ppm
3701-030	GFG Dynagard for Oxygen 0 - 25% Volume
3707-050	GFG Dynagard for Sulfur Dioxide 0 - 50 ppm
3715-001	GFG Dynagard for Ozone 0 - 1 ppm

Back to Top