|
| |
Gas Detector Calibration
Supplies
OTIS Calibration
Station
Calibration Gas
Regulators
Cylinder Matrix
|
OTIS Instruments Calibration Station |
|
|
OTIS Instruments Calibration Station™
(Model OI-520) is a precision gas calibrator/blender that simplifies the
calibration of gas detection instrumentation! Calibration Station™
saves time and money by providing the flexibility to set a wide range of
calibration gas levels (ppm) from a single calibration gas cylinder.
This may substantially
reduce the number of calibration gas cylinders required.
With the OTIS' Calibration Station™, you can choose gas calibration levels
between 2% and 20% of the cylinder's gas concentration (ppm). In many
cases, the Calibration Station™ can also eliminate the need for zero air
cylinders!
|
Ordering
Information |
|
Part Number |
Description |
List Price
(U.S. $) |
|
OI-520 |
OTIS Instruments Calibration
Station complete with pressure regulator, charcoal filter air
purifier, 12 volt DC battery charger, 110 Volt AC wall adapter,
quick disconnect plug, carrying case, and a calibration cup for
OTIS
fixed system sensor assemblies. |
|
|
|
CALGAZ Calibration Gases |
 |
Calgaz's unique production methods,
dedication to quality, unparalleled service and support,
have defined Calgaz as the standard for calibration gas, calibration
regulators, and accessories. Wherever you are,
whatever your application, you can rely on Calgaz calibratin gas. Calgaz calibration gases in non-refillable cylinders and their full line
of regulators are manufactured in Cambridge, Maryland, USA at their
state-of-the-art production facility. |
|
Ordering
Information For Our More Popular Calibration Gases |
|
Cylinder |
Type |
Combustible Gas |
CO |
H2S
|
O2 |
List Price (U.S. $)
(HAZMAT Freight
is Extra) |
|
2AL
(34 Liter) |
Reactive Multi-Mix |
2.5% CH4 (50% LEL)
|
50 ppm |
25 ppm |
12% |
|
|
8AL
(58 Liter) |
Reactive Multi-Mix |
2.5% CH4 (50% LEL)
|
50 ppm |
25 ppm |
12% |
|
|
2AL
(34 Liter) |
Reactive Multi-Mix |
2.5% CH4 (50% LEL)
|
250 ppm |
15 ppm |
18% |
|
|
8AL
(58 Liter) |
Reactive Multi-Mix |
2.5% CH4 (50% LEL)
|
250 ppm |
15 ppm |
18% |
|
|
2AL
(34 Liter) |
Reactive Multi-Mix |
1.62% CH4
(50% LEL Propane
Simulant) |
250 ppm |
25 ppm |
18% |
|
|
8AL
(58 Liter) |
Reactive Multi-Mix |
1.62% CH4
(50% LEL Propane
Simulant) |
250 ppm |
25 ppm |
18% |
|
|
6D
(103 Liter) |
Non-Reactive
Multi-Mix |
2.5% CH4 (50% LEL) |
250 ppm |
----- |
18% |
|
|
6D
(103 Liter) |
Non-Reactive
Multi-Mix |
1.62% CH4
(50% LEL Propane
Simulant) |
50 ppm |
----- |
18% |
|
|
6D
(103 Liter) |
Non-Reactive
Multi-Mix |
100 ppm Isobutylene |
----- |
----- |
20.9% |
|
|
2AL
(34 Liter) |
Reactive |
--------------------------- |
----- |
25 ppm
in N2 |
----- |
|
|
8AL
(58 Liter) |
Reactive |
-------------------------- |
----- |
25 ppm
in N2 |
----- |
|
|
Many more
calibration gases and mixtures are available. Please call
for details. |
|
|
CALGAZ Regulators |
|
715 Series
4200 Series
2000 Series DFR |
|
Ordering Information |
|
Part Number |
Description |
List Price
(U.S. $) |
|
713-0.5 LPM |
713 series regulators have a maximum inlet
pressure of 500 psig/35 bar and an inlet fitting to match the CGA 600 in the 7EOC and 7HP
calibration gas cylinders. Factory preset flow
rate. |
|
|
713-1.0 LPM |
|
715-0.5 LPM |
715 series regulators have a
maximum inlet pressure of 1000 psig/70 bar and fits the 2AL, 8AL
and 6D calibration gas cylinders. Factory preset flow rate. |
|
|
715-1.0 LPM |
|
4210-0.5 LPM |
4200 series
regulators, also known as the “Trigger” are designed to provide
aerosol capability. The "Trigger" can be used with the
2AL, 8AL, and 6D calibration gas cylinders. Factory preset flow rate. |
|
|
4210-1.0 LPM |
|
2004 DFR |
The patented two
stage Demand Flow Regulator (DFR) is designed for use with
instruments that utilize a pump to draw the calibration gas
across the sensor(s).
The 2004 has a
maximum inlet pressure of 1000 psig/70 bar and fits the 2AL, 8AL
and 6D calibration gas cylinders. Suggested for use with HCl & Cl2.
|
|
|
2007 DFR |
The patented two
stage Demand Flow Regulator (DFR) is designed for use with
instruments that utilize a pump to draw the calibration gas
across the sensor(s). The 2007 has a
maximum inlet pressure of 500 psig/35 bar and an inlet fitting
to match the CGA 600 in the 7EOC and 7HP cylinders.
|
|
|
Many more regulator
flow rates are available. Please call for details. |
|
|
CALGAZ Calibration Gas Cylinder
Matrix |
|
Model No. |
Contents |
Service Pressure |
Dimensions |
Weight |
Material |
|
1AL Aerosol |
11 liters
|
155 psig/10.7 bar |
11"/279 mm x
2.75"/70 mm |
0.3 lb /0.14 kg |
Aluminum
|
|
2AL |
34 liters
|
500 psig/34.5 bar |
11.1"/282 mm x
2.9"/74 mm |
1 lb /0.44 kg |
Aluminum
|
|
8AL |
58 liters |
500 psig/34.5 bar |
14.25"/362 mm x
3.5"/89 mm |
1.7 lb /0.75 kg |
Aluminum |
|
6D |
103 liters |
1000 psig/69 bar |
14"/356 mm x
3.25"/83 mm |
3 lb /1.4 kg |
Steel |
|
5E |
552 liters |
2200 psig/151.8 bar
|
20.75"/527 mm x
4.5"/114 mm |
7 lb /3.18 kg |
Steel |
|
7EOC |
17 liters
|
240 psig/16.6 bar |
11"/279 mm x
2.9"/74 mm |
1 lb /0.47 kg |
Steel
|
|
7HP |
34 liters
|
500 psig/34.5 bar |
11"/279 mm x
2.9"/74 mm |
1.5 lb /0.68 kg |
Steel
|
|
|
